Flaming Rose Heart Embroidery Design, Instant Download

This one took me a long time to get right. Its a heart with flames rising from the base and full rose blooms climbing up the sides -- kinda like tattoo flash art but made for fabric. The flames are orange and yellow with curling tips, the roses are deep red with green leaves, and the whole thing sits in a tight composition where the botanicals and the fire overlap at the edges. Dense, bold, probably the most ambitious design in my catalog.

Six colours and a density of 1848 -- thats exceptionally high. Dont even attempt this without a firm cutaway stabiliser, and on anything with texture, lay a sheet of water-soluble topping over the surface before you start. The rose petals have layered directional fill that builds up real depth. Satin columns on the fire sections need clean tension to hold the gradient effect -- back it properly and slow your machine speed down for the dense petal areas. the 5-inch hoop size sits well on denim with cutaway and dissolvable topping and it came out exactly right. On a thin cotton tee without backing the column stitches on the petals showed every fabric thread underneath, which kills the effect. Avoid knit or stretch fabrics entirely.

Five sizes, 3.33 to 7.13 inches wide, square-ish at each size. Stitch counts are very high: 43053 on the smallest up to 98799 on the 7 inch version. Check your bobbin halfway through the large size -- its nearly 100,000 stitches. I ran the file through Wilcom EmbroideryStudio with careful colour sequencing to minimise colour changes and keep the fire-to-rose transitions smooth.

A leather jacket shop placed an order earlier this year for the 6 inch version and told me customers paid a premium for it specifically. Run it on heavy canvas or denim for the best result. Firm stabiliser, dissolvable topping, slow speed on the rose areas. Use a size smaller than you think you need if youre unsure -- better to test on the 4 inch before committing the large to an expensive jacket back.